Ingenuity in Motion

Matrix™ 7100 Overview

The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables.

 

The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost.

 

The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation.

 

Key Features

  • Touch screen operator interface terminal for simple setup and operation
  • Simple web guide adjustment
  • Rapid changeover to support multiple products
  • Flexible to support changing requirements
  • Base configuration supports Backing Web with Release Liner plus 4 membranes
  • Extruded aluminum structural frame
  • Flying shear for continuous card cutting

 

Matrix 7100 Specifications

Capacities

Web width: 0.25 in. – 4 in. (0.6 cm – 10.16 cm)

Membrane Reel: 3 in. ID x 14 in. OD (7.62 cm x 30.5 cm)

Backing Web Reel: 6 in. ID x 16 in. OD (15.25 cm x 41 cm)

Performance

Throughput: 1200 cards/hour (20 ea 12 in. (30.48 cm) cards/min)

Card length: 7.87 in. – 23.62 in. ±0.04 in.

200 mm – 600 mm ±1.0 mm

Lamination tolerance: ±0.01"

(0.25 mm)

(plus membrane width tolerance)

Speed range: 0.19 in./sec – 3.94 in./sec (5 mm/sec 100 mm/sec)

Options

100% inprocess inspection with reject marking

Additional Unwind Modules (with or without tension control)

Additional Peel Bar Assemblies

Additional Release Liner or Interleaf Web Rewind Modules

Final Lamination Take-up reel module

Custom configurations

Facilities Requirements

Power: 200/240 VAC, 50/60 Hz, 20 Amp single phase

Process Air: 4 cfm @ 80 PSI (110 lpm @ 5.4 bar) clean, dry air

Dimensions

Width: 109 in. (277 cm)

Depth: 23 in. (58 cm)

Height: 61.5 in. (156 cm)

Weight: 470 lbs (213 kg)

Warranty

12 months

Certified

 

Matrix™ is a registered trademark of Kinematic Automation Inc.

Specifications subject to change without notice

 

Kinematic does not collect or store any personal information about you when you browse our website

Copyright © 2018 Kinematic  Automation Inc.

Kinematic Automation Inc.

PO Box 69 Twain Harte, CA  95383

Tel: 1.209.532.3200 Fax: 1.209.532.0248