Matrix™ 1600 Overview
The Matrix 1600 Reagent Dispensing Module provides the low cost solution for reagent application onto lateral flow test strip products. Ease of set-up and use makes this an ideal system for both product development and production.
Robust construction utilizing high quality components provides the reliability required in production scenarios. With the touch screen interface, the operator controls insure consistent results from batch to batch.
Dispensing tip line spacing adjustment and replacement can be accomplished without tools, allowing quick change-over between products. No additional devices are required to set or adjust operational settings. Platen speed, flow rate, dot spacing, and dot volume are all configured using simple scroll-through interface screens.
Matrix 1600 Specifications
Sheet size: 3.93 in. x 12.59 in. (100 mm x 320 mm)
Number of lines: 1 to 4
Supply reservoir: 5000 µl
Syringe: 100 µl (standard size) - 1 ml (various syringe sizes available for purchase)
Minimum dot volume: 0.5 µl
Minimum dot spacing: 0.08 in. (2 mm)
Stripe Volume: min 0.5 µl to max 20 µl
Platen speed: 0.78 in. to 4.72 in./sec (2 cm to 12 cm/sec)
Line spacing: 0 in. to 3.15 in. (0 mm to 80 mm)
Dispense rate: ± 1%
Platen speed: ± 1%
Power 110 VAC 50/60 Hz 3 amp - 230 VAC 50/60 Hz
Process Air 3cfm @ 85psi (85 l/min @ 5.86bar) Clean dry air
*Width: 22 in. (55.88 cm)
Depth: 19 in. (77.47 cm)
Height: 15 in. (38 cm)
Weight: 60 lbs (27 kg)
*moving platen extends up to 5.25 in. (13 cm) beyond sides of unit
Matrix™ is a registered trademark of Kinematic Automation Inc.
Specifications subject to change without notice
Kinematic does not collect or store any personal information about you when you browse our website
Copyright © 2018 Kinematic Automation Inc.
Kinematic Automation Inc.
PO Box 69 Twain Harte, CA 95383
Tel: 1.209.532.3200 Fax: 1.209.532.0248