Matrix™ 7100 Overview
The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables.
The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost.
The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation.
Matrix 7100 Specifications
Web width: 0.25 in. – 4 in. (0.6 cm – 10.16 cm)
Membrane Reel: 3 in. ID x 14 in. OD (7.62 cm x 30.5 cm)
Backing Web Reel: 6 in. ID x 16 in. OD (15.25 cm x 41 cm)
Throughput: 1200 cards/hour (20 ea 12 in. (30.48 cm) cards/min)
Card length: 7.87 in. – 23.62 in. ±0.04 in.
200 mm – 600 mm ±1.0 mm
Lamination tolerance: ±0.01"
(plus membrane width tolerance)
Speed range: 0.19 in./sec – 3.94 in./sec (5 mm/sec – 100 mm/sec)
100% inprocess inspection with reject marking
Additional Unwind Modules (with or without tension control)
Additional Peel Bar Assemblies
Additional Release Liner or Interleaf Web Rewind Modules
Final Lamination Take-up reel module
Power: 200/240 VAC, 50/60 Hz, 20 Amp single phase
Process Air: 4 cfm @ 80 PSI (110 lpm @ 5.4 bar) clean, dry air
Width: 109 in. (277 cm)
Depth: 23 in. (58 cm)
Height: 61.5 in. (156 cm)
Weight: 470 lbs (213 kg)
Matrix™ is a registered trademark of Kinematic Automation Inc.
Specifications subject to change without notice
Kinematic does not collect or store any personal information about you when you browse our website
Copyright © 2018 Kinematic Automation Inc.
Kinematic Automation Inc.
PO Box 69 Twain Harte, CA 95383
Tel: 1.209.532.3200 Fax: 1.209.532.0248