Matrix™ 6300 Overview
The Matrix 6300 Reel-to-Reel Dispensing Platform was developed to meet the requirements of the moderate to high volume production facility. The unit was designed in modular fashion to allow process flexibility while at the same time optimizing product yields and throughput.
The Matrix 6300 has applications for continuous striping of membranes using non-contact or contact dispense. The new High Efficiency Dryer provides for a hands-free dispensing/drying process allowing improved efficiency and quality.
The ability to continuously stripe up to 5 lines with 100% in process inspection allows the ultimate in quality and throughput. Multiple recipe storage capability provides for simple and reliable set-up & operation while simplifying process validation.
Matrix 6300 Specifications
Web width: 0.197 in. – 1.97 in. (5 mm – 50 mm)
Dryer Chamber: variable, 55° C (131° F) max, ± 4°
Dryer/blower Air Flow: variable, 100cfm max
Drying Chamber Web Path: variable up to 40’
Backed Nitrocellulose, Conjugate, and Sample Membranes
Web supply & rewind: 3 in. ID x 16 in. OD (7.6 cm ID x 40 cm OD)
Web Speed: 0.2 in./sec – 5.9 in./sec (0.5 cm/sec – 15 cm/sec) ± 2%
Pump dispense rate: 0.5 µl/cm – 2 µl/cm ± 5%
2 µl/cm – 20 µl/cm ± 3%
Additional dryer/blower element
Contact or non-contact striping
Dispense up to 5 lines in standard chassis
Dispense up to 8 lines with additional add-on module
Power 208 VAC, 50/60 Hz, 30 amp Single phase
Process Air 2.5cfm @ 80psi (70.8 firstname.lastname@example.org bar) clean, dry air
Width: 84 in. (211.7 cm)
Depth: 36 in. (91.6 cm)
Height: 66 in. (166.2 cm)
Weight: 1000 lbs (454 kg)
Matrix™ is a registered trademark of Kinematic Automation Inc.
Specifications subject to change without notice
Kinematic does not collect or store any personal information about you when you browse our website
Copyright © 2018 Kinematic Automation Inc.
Kinematic Automation Inc.
PO Box 69 Twain Harte, CA 95383
Tel: 1.209.532.3200 Fax: 1.209.532.0248